MODEL | |
Controller |
Fanuc 0i-TD
|
Controlled axis Nos. |
7(X1, Y1, Z1, C1,X2, Z2, C2)
|
Bar capacity (Main & Sub spindle) |
20mm
|
Max. face drilling length |
29mm
|
Min. back drilling lengh |
60mm
|
Axis travel (mm) | |
Z1 |
200 mm
|
Z2 |
205 mm
|
X1 (Dia.) |
295 mm
|
X2 (Dia.) |
471 mm
|
Y1 |
124 mm
|
Cs contour axis |
C1, C2
|
Tools | |
OD tool Nos. |
5
|
OD tool shank size |
12 x 12 mm
|
Cross rotary tool Nos. (collet) |
4 (ER11)
|
Max. dia. of cross slitting saw |
standard:20mm, optional:20-40mm
|
Front/Back rotary tool Nos.(collet) |
5/5 (ER11)Note
|
Built-in spindle and subspindle motor specification | |
Output (rated/30minutes) / rated speed |
SP1:2.2/3.7kw / 12500RPM, SP2:1.1/3.7kw / 8000RPM
|
Max. spindle / subspindle speed |
10,000 / 8,000 RPM
|
Cross spindle motor
|
|
Rated output |
0.75 KW
|
Rated speed |
4,000 RPM
|
End-working spindle motor
|
|
Rated output |
0.75 KW
|
Rated speed |
4,000 RPM
|
Controlled axis motor rated output |
0.75KW
|
Max axis rapid traverse |
24 M/min
|
Spindle center height |
1,010 mm
|
Machine size |
2,300(W) x 1,740(H) x 1,500(D) mm
|
ITEM |
1. Tools, collets, guide bush for one part requested |
2. Complete set of rotary tool ER11 collet holders |
3. Automatic lubrication system |
4. Part catcher |
5. Rotary guide bushing holder |
6. Coolant flow sensor and pump |
7. Fanuc controller |
8. Standard tools(setup, adjustment) |
9. Fixed tool ER16 collet holder (both-in-one) |
10. Standard tools and adjust tools. |
11. Cut-off sensor |
ITEM |
1. Chip conveyor |
2. Bar feeder |
3. Mitsubishi controller |
We provide our customers with expert staff and experience in CNC machine tools. Contact Us