Address : Abdi İpekçi Caddesi 1.Emintaş
Sanayi Sitesi No:74 104-106 PK:34040
Telephone: 0 (212) 577 60 41
E-Mail: info@arimakina.net
Working Hours: Weekdays 08:30 - 18:00
Saturday 08:30 - 14:00
GET QUOTES

AKB-13

Arı Makina Arı Makina

AKB-13


X, Y, Z-axis travel: 3000 x 2000 x 1600 mm

W-axis travel: 700 mm

Table size: 1800 x 2000 mm

Max. table load: 12000 kg

Spindle speed: 3000 min-1

Stroke
 X axis travel (table longitudinal) mm 3000 [4000]
 Y axis travel (spindle vertical) mm 2000 [2300]
 Z axis travel (column cross) mm 1600
 W axis travel (spindle axial) mm 700
 Distance from table top to spindle center mm 0~2000 [0~2300]
 Distance from table center to spindle nose mm 800~2400
Table
 Table work space mm 1800 x 2000
 Table maximun loading capacity kg 12000 [15000]
 Table top profile mm 22mm 7T slots
 Table auto. Indexing ° 0.001 （every 90° Index. by locator pin)
Spindle Head
 Boring spindle diameter mm 130
 Spindle speed (for every 1 min-1) min-1 9~3000
 Spindle speed change range step 2
 Spindle taper 　 BBT50 / BBT50 (BIG-PLUS Dual contact spindle system)※
Feed
 Rapid traverse (X.Y.Z) m/min 10
 Rapid traverse (W) m/min 6
 Feedrate mm/min 1～4000
 Table revolution min-1 1.4
Automatic Tool Changer (ATC)
 Tool shank 　 MAS BT50 / BBT50 (BIG-PLUS Dual contact spindle system) ※
Pull stud 　 MAS P50T-1 （45°）
 Tool storage capacity pc 40 [60/90]
 Max. tool diameter (vacant adjacent pots.) mm 125 [240]
 Max. tool length mm 400
 Max. tool weight kg 25
 Tool selection 　 At random
Motors
 Spindle motor kW AC30（30min） / 22 （Cont.）
 Feed motor kW X‧Z:6.0 / Y‧W‧B:3.0
 Hydraulic motor kW 3.7
Voltages
 Power capacity (Not incl. opt) kVA 67
 Air pressure source pressure MPa 0.5
 Air pressure source flow (Not incl. opt) NL//min 400（atm）
Dimensions
 Machine height mm 4800 [5150]
 Floor space (Not incl. opt) mm 7500 x 7125 [8040 x 7125]
 Machine weight kg 35000

※BIG-PLUS is a trademark registered by BIG DAISHOWA SEIKI CO., LTD.。[ ]: Optional specification。

Standard Optional Accessories

　

Standard Accessories

  • Spindle cooling device  • Power shut off device
 • Chip cover for slide ways  • Monolever type jog feed
 • NC indexing table every 0.001 degree 
   (every 90 degree indexing by locator pin)		  • Rigid tapping
 • Coil type chip conveyor (X axis)  • Scale feed back (X,Y,Z, B)
 • Coolant device with lift type chip conveyor  • Maintenance display
 • Coolant through spindle interface  • Door interlock for NC/EC panel
 • Manual pulse generator  • Foundation bolts & plates
 • 3 color signal light  • Electrical spare parts
 • Work light  • Tool & tool box for reassembly

　

Optional accessories are available besides machine body and standard accessories.

　

Optional accessories
  ATC magazine 　   Operation help
1  60/90 tools 　 18  Interruption for magazine rotation
  Stroke extension 　   Measuring system　
2  X axis 4000mm （快速速度7m/min） 　 19  Centering system simple type
3  Y axis 2300mm 　 20  Centering system touch type
  Table load capacity 　 21  Centering system automatic type
4  15000kg (33000 lbs) 　 22  Auto tool length measurement
  Coolant through spindle 　   Monitoring system
5  Standard pressure coolant pump unit for coolant through spindle (1MPa )  　 23  Meter relay type over load detection
 High pressure coolant pump unit for coolant through spindle (3MPa / 5MPa) 　   Program help
  Coolant and chip disposal  　 24  Macro pattern cycle
6  Oil mist spray 　 25  KURAKI E-guide function (including FANUC manual guide i)
7  External air blow 　   High precision machining
8  Z axis coil conveyor 　 26  AI Contouring control II machining function
9  Chip bucket 　   Safety & others
  Splash guard 　 27  Transformer
10  Splash guard type A (table side)
 AKB-13：H＝1200mm (47.24”)		 　   ※ Machine specifications may be changed by optional accessories.
  ※ Please ask us the details.
11  Splash guard type A with hinge door type (table side) H=2000mm (62.99”) 　
12  Splash guard type B (column side) 　
13  Operator side Splash Guard (Simple type) 　
  Attachment 　
14  Cogsdill /ITS contouring head interface 　
15  Facing head 　
16  Vertical milling attachment
 AKB-13:L=400mm(15.75”) , 600mm(27.56”)		 　
17  Extension sleeve
 AKB-13:L=250mm(9.84”)

 

CNC unit standard & optional specifications - FANUC Oi-MF

　

　 Standard Option
Control Axis
Controlled axes 5 axes (X, Y, Z, W, B axis) ○ 　
Simultaneously controlled axes 4 axes ○ 　
Additional axis control (1 axes) 　 ○
Program input
Least input increment
(X, Y, Z, W axis: 0.001 mm/ 0.00001”, B axis: 0.001 deg)		 ○ 　
Max. programmable dimension±9 digits ○ 　
Absolute / incremental programming [G90/G91] ○ 　
Tape code EIA / ISO automatic recognition ○ 　
Decimal point programming/ pocket calculator type decimal point programming
○ 　
Inch / metric conversion [G20/G21] ○ 　
Polar coordinate command [G15/G16] ○ 　
Interpolation functions
Positioning [G00] ○ 　
Linear interpolation [G01] ○ 　
Circular interpolation [G02/G03] ○ 　
Helical interpolation [G02/G03] 
(Circular interpolation + maximum 2 linear interpolations)
○ 　
Cylindrical interpolation[G07.1] ○  
Feed functions
Feed per minute/feed per revolution [G94/G95] ○ 　
Rapid traverse ○ 　
Dwell [G04] (0-99999.999 sec.) ○ 　
Rapid traverse override F0, Low, 25, 50, 100% ○ 　
Rapid traverse override 0-240% (every 10%) ○ 　
Exact stop/exact stop mode [G09/G61]
cutting mode  / tapping mode  [G64/G63]		 ○ 　
Manual handle feed 
X, Y, Z, W axis: 0.001/0.01/0.1 mm
B axis: 0.001/0.01/0.1 deg.		 ○ 　
Thread cutting, synchronous cutting [G33] ○ 　
Inverse time feed ○ 　
Program storage & editing
Part program storage capacity (length) 512KB (=1280m) ○ 　
Part program storage capacity (length) 2MB (=5120m) 　 ○
Number of registered programs total 400 pc's ○ 　
Program editing ○ 　
Background editing ○ 　
Extended program editing ○ 　
Program comment display program name 31 characters ○ 　
Program number O4 digit ○ 　
Program search ○ 　
Sequence number N5 digit ○ 　
Sequence number search ○ 　
Sequence number reference stop ○ 　
Sub program call (sub program is possible up to tenfold.) ○ 　
　 Standard Option
Operation display
LCD/MDI panel 10.4” color, LCD ○ 　
Clock function ○ 　
Run hour and parts count display ○ 　
Load meter display (Monitoring screen for operation) ○ 　
Graphic display ○ 　
Dynamic graphic display 　 ○
Alarm message and history display ○ 　
Operation history display ○ 　
Periodic maintenance screen ○ 　
Maintenance information screen ○ 　
Erase LCD Screen display ○ 　
Multi-language display ○ 　
Data input / output functions
Memory card interface (ATA flash card slot) ○ 　
Screen hard copy ○ 　
Embedded Ethernet (built-in type) 10base-T / 100 base-TX ○ 　
Reader/puncher interface (RS232C:punch pane) 　 ○
DNC operation by memory card 
 (CF card with PC card adaptor)		 　 ○
Fast Ethernet board 　 ○
Fast data sever include Fast Ethernet board, Ethernet software & function (CF card with PC card adaptor)
　 ○
S.T.M function
S function ○ 　
T function ○ 　
M function ○ 　
Tool compensation
Tool length compensation [G43/G44] ○ 　
Tool radius & tool nose radius compensation [G41/G42] ○ 　
Tool offset pairs 400 pairs ○ 　
Tool offset memory C
Memory for each figure, abrasion, tool length offset, tool diameter offset
○ 　
Tool length measurement ○ 　
Tool offset [G45/G46/G47/G48] ○ 　
Coordinate system
Reference position return manual, automatic[G27/G28/G29] ○ 　
Machine coordinate system selection[G53] ○ 　
Workpiece coordinate system selection [G54～G59,G54.1.P1～G54.1.P48] ○ 　
Workpiece coordinate system setting [G92] ○ 　
Workpiece coordinate system preset [G92.1] ○ 　
Local coordinate system setting [G52] ○ 　
　 Standard Option
Operation help functions
3D coordinate change   ○
Program stop [M00] ○  
Optional  stop[M01] ○ 　
Single block ○ 　
Optional block skip 1pc ○ 　
Optional block skip addition total 4pc' s 　 ○
Dry run 1-4000mm/min ○ 　
All axis machine lock ○ 　
W, Z axis command cancel ○ 　
Auxiliary function lock (S, M, T, command) ○ 　
Program restart ○ 　
Manual intervention and return ○ 　
Manual handle interruption 　 ○
Programmble data / parameter input [G10] ○ 　
Help function ○ 　
Data protection key 　 ○
Program help function
Circular interpolation by programming radius “R”   ○
Canned cycles  [G73,G74, G76, G80~G89, G98, G99]　   ○
Custom macro (Common variables 600 pc' s)   ○
Mirror image (Setting and M command)   ○
Programmable mirror image [G51.1/G50.1] ○ 　
Coordinate system rotation [G68/G69] ○ 　
FS10/11 Tape format ○ 　
Scaling [G51/G50] ○ 　
Play back 　 ○
Precision compensation
Stored pitch error compensation ○ 　
Backlash compensation for each rapid traverse and cutting feed ○ 　
Single direction positioning [G60] ○ 　
Straightness compensation   ○
Maintenance & Safety
Over travel ○ 　
Stored stroke check 1 ○ 　
Self-diagnosis function ○  
Stored stroke check 2,3 [G22/G23] ○ 　
Stroke limit check before move ○ 　
Machining help function
Tool life management (up to 128 groups) ○ 　
Auto corner override [G62] ○ 　
Optional angle chamfering and corner R ○ 　
Federate control with acceleration in circular interpolation ○ 　
Rigid tap by Manual handle   ○
AI advanced preview control (20 blocks) ○  

* CF card should be selected by 128MB, 256MB or 1GB.

 

We provide our customers with expert staff and experience in CNC machine tools. Contact Us

  • © 2017 All Rights Reserved.

FTC Yazılım